FSC-BT1006A Qualcomm Chip Dual Mode Stereo Audio Bluetooth Module MFi Support

Product Overview:

FSC-BT1006A adopts Qualcomm QCC3007(Bluetooth chip) , it is a Bluetooth 5.0 dual-mode audio module. It’s provide a fully Bluetooth Classic and Low Energy compliant system for data and audio communication based on Feasycom Bluetooth Stack.


  • Module Number: FSC-BT1006A
  • Chipset: Qualcomm QCC3007
  • Bluetooth Version: Bluetooth 5.0 Dual-Mode
  • Cover Range: 50m(164ft)
  • Profiles: HFP,HSP, A2DP,PBAP, AVRCP, MAP,SPP,BLE Profiles
  • Product Detail

    Detail Parameters

    Bluetooth Model FSC-BT1006A
    On-board chip QCC3007
    Bluetooth Version V5.0 Dual-mode Bluetooth low energy radio
    Frequency 2.402 – 2.480 GHz
    Transmit Power +9 dBm (Maximum)
    Receive Sensitivity -92.0 dBm (typ) π/4 DQPSK receiver sensitivity
    and -82.0 dBm(typ) 8DPSK receiver sensitivity
    Real-time digitised RSSI available to application
     Raw Data Rates (Air) 3 Mbps(Classic BT – BR/EDR)
    UART Interface TX, RX, CTS, RTS
    General Purpose I/O
    Default 115200,N,8,1
    Baudrate support from 1200 to 921600
    5,6,7,8 data bit character
    GPIO 14(maximum – configurable) lines
    O/P drive strength (4 mA)
    Pull-up resistor (33 KΩ) control
    Read pin-level
    I2C Interface 1 (hardware I2C interface). Up to 400 kbps
    Master and slave I2C interface
    SPI Interface SPI debug and programming interface with read accessdisable locking
    ADC Interface Analog input voltage range: 0~ 1.3V
    Supports single a 10-bit ADC and a 10-bit DAC
    1 channels (configured from GPIO total)
    USB Interface 1 full-speed (12Mbps)
    Audio CODEC SBC and AAC audio codecs
    TrueWireless Stereo(TWS),which allows two devices to be configured as a stereo pair
    Configurable Signal Detection to trigger events
    1 bank of up to 10-stage Speaker Parametric EQ
    6 banks of up to 5-stage User Parametric EQ for music enhancement
    3Dstereo widening
    Compander to compress or expand the dynamic range of the audio
    Post Mastering to improve DAC fidelity
    Dual I²S outputs with crossover
    USB audio
    Stereo audio ADC with line input, stereo audio DAC
    Supported sample rates of 8, 11.025, 16, 22.05, 32, 44.1, and48 kHz
    MIC SNR:  92 dB
    MIC THD+N:  0.004%
    Headphone SNR:  96dB
    Headphone THD+N:  0.0042%
    Headphone Output Voltage: 778mV rms (Full-scale swing)(Max)
    Stereo separation (crosstalk):  -90dB(Max)
    BR/EDR SPP (Serial Port Profile) – Up to 600 Kbps
    A2DP/AVRCP/HFP/HSP/HOGP/PBAP/SPP Profiles support
    Bluetooth Low Energy GATT Client & Peripheral – Any Custom Services
    Simultaneous BR/EDR and BLE support
    BR/EDR up to 7 active slaves
    Bluetooth Low Energy 1 connection as peripheral , up to 5 connections as central
    FW upgrade Via UART(TBD)
    USB(TBD)
    OTA
    SPI
    Supply VDD_IO: 1.7 ~ 3.6V;  VBAT_IN: 2.8V~ 4.3V
    Power Consumption Max Peak Current(TX Power @ +8dBm TX): 78mA
    Standby Doze (Wait event) – 15mA (TBD)
    Deep Sleep – <1mA(TBD)
    Dimensions 13mm(W) X 26.9mm(L) X 2.2mm(H); Pad Pitch 1mm
    Operating -40°C to +85°C
    Storage -40°C to +105°C
    Lead Free Lead-free and RoHS compliant
    Warranty One Year
    Humidity 10% ~ 90% non-condensing
    MSL grade MSL 3
    ESD grade Human Body Model:  Class 2   2kV (all pins)
    Charged Device Model: Class III    500 V (all pins)

    Block Diagram

    BT1006A Diagram1 BT1006A Diagram2

    Features

    *Bluetooth v5.0/4.0/3.0/2.1/2.0/1.2/1.1, Class 1.5
    *80 MIPS performance, 24-bit fixed-point DSP core
    *Over the air updates of external Flash partitions
    *Wideband speech support
    *Stereo codec 
    *Stereo line input
    *SBC and AAC audio Codecs support
    *1-mic cVc hands-free NR/EC
    *MFI Support

    Application

    *Bluetooth speakers
    *Bluetooth music box
    *Bluetooth headset
    *Car audio applications
    *USB audio

    Datasheet Download


  • Previous:
  • Next: